FoxGate S6124 - Ftp-Dir; Ftp-Server Enable

60
Switch#copy tftp://10.1.1.1/nos.img nos.img
(3) Save images in the FLASH to the TFTP server of 2004:1:2:3::6
Switch#copy nos.img tftp:// 2004:1:2:3::6/ nos.img
(4) Obtain system file nos.img from the TFTP server 2004:1:2:3::6
Switch#copy tftp:// 2004:1:2:3::6/nos.img nos.img
(5) Save the running configuration files
Switch#copy running-config startup-config
Relevant Command: write
1.5.3 ftp-dir
Command: ftp-dir <ftp-server-url>
Function: Browse the file list on the FTP server.
Parameter: The form of <ftp-server-url> is ：
ftp://<username>:<password>@{ <ipv4address> | <ipv6address> }, amongst <username>
is the FTP user name, <password> is the FTP user password, { <ipv4address> |
<ipv6address> } is the IPv4 or IPv6 address of the FTP server.
Command Mode: Admin Mode
Example: Browse the list of the files on the server with the FTP client, the username is
―Switch‖, the password is ―superuser‖
Switch#ftp-dir ftp://Switch:superuser @10.1.1.1.
1.5.4 ftp-server enable
Command: ftp-server enable
no ftp-server enable
Function: Start FTP server, the ―no ftp-server enable‖ command shuts down FTP server
and prevents FTP user from logging in.
Default: FTP server is not started by default.
Command mode: Global Mode
Usage Guide: When FTP server function is enabled, the switch can still perform ftp client
functions. FTP server is not started by default.
Example: enable FTP server service.
Switch#config
Switch(config)# ftp-server enable