240
TrustView version2 message inform successed
TrustView inform free resource successed
TrustView inform web redirect address successed
TrustView inform user binding data successed
TrustView version2 message encrypt/digest enabled
Key: 08:02:33:34:35:36:37:38
Rcvd 106 encrypted messages, in which MD5-error 0 messages, DES-error 0 messages
Sent 106 encrypted messages
Free resource is 200.101.0.9/255.255.255.255
Web redirect address for unauthencated users is <http://200.101.0.9:8080>
Rcvd 0 force log-off packets
Rcvd 19 force accounting update packets
Using version two private packet
22.23 show ip dhcp snooping
Command: show ip dhcp snooping [interface [ethernet] <interfaceName>]
Function: Display the current cofiguration information of dhcp snooping or display the
records of defense actions of a specific port.
Parameters: <interfaceName>: The name of the specific port.
Command Mode: Admin and Configuration Mode.
Default Settings: None.
Usage Guide: If there is no specific port, then display the current cofiguration information
of dhcp snooping, otherwise, display the records of defense actions of the specific port.
Example:
switch#show ip dhcp snooping
DHCP Snooping is enabled
DHCP Snooping binding arp: disabled
DHCP Snooping maxnum of action info:10
DHCP Snooping limit rate: 100(pps), switch ID: 0003.0F12.3456
DHCP Snooping droped packets: 0, discarded packets: 0
DHCP Snooping alarm count: 0, binding count: 0,
expired binding: 0, request binding: 0
interface trust action recovery alarm num bind num
To Next Page
Loading...
