FoxGate S6124 - Show Snmp User; Show Snmp View

50
Community access
Community access permission
Trap-rec-address
IP address which is used to receive Trap.
Trap enable
Enable or disable to send Trap.
SecurityIP
IP address of the NMS which is allowed
to access Agent
1.4.9 show snmp user
Command: show snmp user
Function: Display the user information commands.
Command Mode: Admin and Configuration Mode.
Example:
Switch#show snmp user
User name: initialsha
Engine ID: 1234567890
Auth Protocol:MD5 Priv Protocol:DES-CBC
Row status:active
Displayed Information
Explanation
User name
User name
Engine ID
Engine ID
Priv Protocol
Employed encryption algorithm
Auth Protocol
Employed identification algorithm
Row status
User state
1.4.10 show snmp view
Command: show snmp view
Function: Display the view information commands.
Command Mode: Admin and Configuration Mode.
Example:
Switch#show snmp view
View Name:readview 1. -Included active
1.3. Excluded active
Displayed Information
Explanation
View Name
View name
1.and1.3.
OID number
Included
The view includes sub trees rooted by