FoxGate S6124 - Show Mrpp; Show Mrpp Statistics

347
Command Mode: MRPP ring mode
Default: Default the node mode is secondary node.
Usage Guide:
Example: Configure the switch to primary node. MRPP ring 4000.
Switch(config)# mrpp ring 4000
Switch(mrpp-ring-4000)#node-mode master
36.12 show mrpp
Command: show mrpp [ring-id>]
Function: Display MRPP ring configuration.
Parameter: <ring-id> is MRPP ring ID, the valid range is from 1 to 4096, if not specified
ID, it display all of MRPP ring configuration.
Command Mode: Admin and Configuration Mode.
Default: None
Usage Guide: None
Example: Display configuration of MRPP ring 4000 of switch
Switch# show mrpp 4000
36.13 show mrpp statistics
Command: show mrpp statistics [<ring-id>]
Function: Display statistic information of data packet of MRPP ring receiving and
transferring.
Parameter: <ring-id> is MRPP ring ID, the valid range is from 1 to 4096, if not specified
ID, it displays all of MRPP ring statistic information.
Command Mode: Admin and Configuration Mode.
Default: None
Usage Guide: None
Example: Display statistic information of MRPP ring 4000 of switch.
Switch# show mrpp statistic 4000