FoxGate S6124 - Show Spanning-Tree Mst Config

151
Standard
STP version
Bridge MAC
Bridge MAC address
Bridge Times
Max Age, Hello Time and Forward Delay of the bridge
Force Version
Version of STP
Instance Information
Self Bridge Id
The priority and the MAC address of the current bridge for the
current instance
Root Id
The priority and the MAC address of the root bridge for the
current instance
Ext.RootPathCost
Total cost from the current bridge to the root of the entire
network
Int.RootPathCost
Cost from the current bridge to the region root of the current
instance
Root Port ID
Root port of the current instance on the current bridge
MSTP Port List Of The
Current Instance
PortName
Port name
ID
Port priority and port index
ExtRPC
Port cost to the root of the entire network
IntRPC
Cost from the current port to the region root of the current
instance
State
Port status of the current instance
Role
Port role of the current instance
DsgBridge
Upward designated bridge of the current port in the current
instance
DsgPort
Upward designated port of the current port in the current
instance
12.2.2 show spanning-tree mst config
Command: show spanning-tree mst config
Function: Display the configuration of the MSTP in the Admin mode.
Command mode: Admin Mode
Usage Guide: In the Admin mode, this command can show the parameters of the MSTP
configuration such as MSTP name, revision, VLAN and instance mapping.
Example: Display the configuration of the MSTP on the switch.
Switch#show spanning-tree mst config