FoxGate S6124 - Commands for Snmp; Debug Snmp Mib; Debug Snmp Kernel; Rmon Enable

46
Switch(Config-if-Vlan1)#ip dhcp-client enable
Switch(Config-if-Vlan1)#exit
Switch(config)#
1.4 Commands for SNMP
1.4.1 debug snmp mib
Command: debug snmp mib
no debug snmp mib
Function: Enable the SNMP mib debugging; the "no debug snmp mib‖ command
disables the debugging.
Command Mode: Admin Mode.
Usage Guide: When user encounters problems in applying SNMP, the SNMP debugging
is available to locate the problem causes.
Example:
Switch#debug snmp mib
1.4.2 debug snmp kernel
Command: debug snmp kernel
no debug snmp kernel
Function: Enable the SNMP kernel debugging; the ―no debug snmp kernel‖ command
disables the debugging function.
Command Mode: Admin Mode.
Usage Guide: When user encounters problems in applying SNMP, the SNMP debugging
is available to locate the problem causes.
Example:
Switch#debug snmp kernel
1.4.3 rmon enable
Command: rmon enable
no rmon enable
Function: Enable RMON; the ―no rmon enable‖ command disables RMON.
Command mode: Global Mode
Default: RMON is disabled by default.