FoxGate S6124 - Ip Igmp Snooping Vlan L2-General-Querier-Version; Ip Igmp Snooping Vlan Limit

257
receive multicast datagrams.
Example:
Switch(config)#ip igmp snooping vlan 2 L2-general-query-source 192.168.1.2
24.2.9 ip igmp snooping vlan
l2-general-querier-version
Command: ip igmp snooping vlan <vlanid> L2-general-query-version <version>
Function: Configure igmp snooping.
Parameters: vlan-id is the id of the VLAN, limited to <1-4094>. version is the version
number, limited to <1-3>.
Command Mode: Global mode.
Default: version 3.
Usage Guide: When the switch is connected to V1 and V2 capable environment, and for
VLAN which has source of layer 2 query configuration, the VLAN can be queried only if
the version number has been specified. This command is used to query the layer 2
version number.
Example:
Switch(config)#ip igmp snooping vlan 2 L2-general-query-version 2
24.2.10 ip igmp snooping vlan limit
Command: ip igmp snooping vlan <vlan-id> limit {group <g_limit> | source
<s_limit>}
no ip igmp snooping vlan <vlan-id> limit
Function: Configure the max group count of VLAN and the max source count of every
group. The ―no ip igmp snooping vlan <vlan-id> limit‖ command cancels this
configuration.
Parameter: <vlan-id> is the VLAN number.
g_limit：<1-65535>, max number of groups joined.
s_limit：<1-65535>, max number of source entries in each group, consisting
of include source and exclude source.
Command mode: Global Mode.
Default: Maximum 50 groups by default, with each group capable with 40 source entries.
Usage Guide: When number of joined group reaches the limit, new group requesting for