FoxGate S6124 - Show Ipv6 Dhcp Binding; Show Ipv6 Dhcp Interface

224
21.24 show ipv6 dhcp binding
Command: show ipv6 dhcp binding [<ipv6-address>| pd
<ipv6-prefix|prefix-length>|count]
Function: To show all the address and prefix binding information of DHCPv6.
Parameter: <ipv6-address> is the specified IPv6 address; count show the number of
DHCPv6 address bindings.
Command Mode: Admin and Configuration Mode.
Usage Guide: To show all the address and prefix binding information of DHCPv6, include
type, DUID, IAID, prefix, valid time and so on.
Example:
Switch#show ipv6 dhcp binding
Client: iatype IANA, iaid 0x0e001d92
DUID: 00:01:00:01:0f:55:82:4f:00:19:e0:3f:d1:83
IANA leased address: 2001:da8::10
Preferred lifetime 604800 seconds, valid lifetime 2592000 seconds
Lease obtained at %Jan 01 01:34:44 1970
Lease expires at %Jan 31 01:34:44 1970 (2592000 seconds left)
The number of DHCPv6 bindings is 1
21.25 show ipv6 dhcp interface
Command: show ipv6 dhcp interface [<interface-name>]
Function: To show the information for DHCPv6 interface.
Parameter: <interface-name> is the name and number of interface, if
the<interface-name> parameter is not provided, then all the DHCPv6 interface
information will be shown.
Command Mode: Admin and Configuration Mode.
Usage Guide: To show the information for DHCPv6 interface, include Port Mode (Prefix
delegation client、DHCPv6 server) , and the relative conformation information under all
kinds of mode.
Example:
Switch#show ipv6 dhcp interface vlan10
Vlan10 is in server mode
Using pool: poolv6
Preference value: 20