FoxGate S6124 - Show Mls Qos Interface

163
Usage Guide: Displays all configured policy-map or specified policy-map information.
Example:
Switch # show policy -map
Policy Map p1, used by 1 port
Class Map name: c1
policy 20000 2000
Displayed information
Explanation
Policy Map p1
Name of policy map
used by 1 port
Used port
Class map name:c1
Name of the class map referred to
policy 20000 2000
Policy implemented
13.18 show mls qos interface
Command: show mls qos interface [<interface-id>] [buffers | policy | queuing |
statistics ]
Function: Displays QoS configuration information on a port.
Parameters: <interface-id> is the port ID; buffers is the queue buffer setting on the port;
policy is the policy setting on the port; queuing is the queue setting for the port;
statistics is the number of packets allowed to pass for in-profile and out-of-profile traffic
according to the policy bound to the port.
Default: N/A.
Command mode: Admin Mode.
Usage Guide: Statistics are available only when ingress policy is configured.
Example:
Switch #show mls qos interface ethernet 1/2
Ethernet 1/2
default cos:0
DSCP Mutation Map: Default DSCP Mutation Map
Attached policy map for Ingress: p1
Displayed information
Explanation
Ethernet1/2
Port name
default cos:0
Default CoS value of the port.
DSCP Mutation Map: Default DSCP Mutation
Map
Port DSCP map name