FoxGate S6124 - Clear Cpu-Rx-Stat Protocol; Cpu-Rx-Ratelimit Channel; Show Cpu-Rx Protocol

382
43.4 clear cpu-rx-stat protocol
Command: clear cpu-rx-stat protocol [<protocol-type>]
Function: Clear the statistics of the CPU received packets of the protocol type.
Parameter: <protocol-type> is the type of the protocol of the packet, including dot1x, stp,
snmp, arp, telnet, http, dhcp, igmp, ssh.
Command Mode: Global Mode
Usage Guide: This command clear the statistics of the CPU received packets of the
protocol type, it is supposed to be used with the help of the technical support.
Example: Clear the statistics of the CPU receives ARP packets.
Switch(config)#clear cpu-rx-stat protocol arp
43.5 cpu-rx-ratelimit channel
This type of switch does not support the command.
43.6 show cpu-rx protocol
Command: show cpu-rx protocol [<protocol-type>]
Function: Show the statistics of the CPU received packets of the specified protocol type.
Parameter: <protocol-type> is the protocol type of the packets, if do not input
parameters, show all statistic packets..
Command Mode: Admin Mode
Default: None.
Usage Guide: This command is used to debug, it is supposed to be used with the help of
the technical support.
Example：Show the statistics of CPU receiving ARP packets.
Switch#show cpu-rx protocol arp
Type Rate-limit TotPkts CurState
arp 500 3 allowed