296
Functions: Reveal configuration information of time range functions.
Parameters: word assign name of time-range needed to be revealed.
Default: None.
Command Mode: Admin Mode
Usage Guide: When not assigning time-range names, all time-range will be revealed.
Examples:
Switch#show time-range
time-range timer1 (inactive, used 0 times)
absolute-periodic Saturday 0:0:0 to Sunday 23:59:59
time-range timer2 (inactive, used 0 times)
absolute-periodic Monday 0:0:0 to Friday 23:59:59
27.28 time-range
Command: [no] time-range <time_range_name>
Functions: Create the name of time-range as time range name, enter the time-range
mode at the same time.
Parameters: time_range_name, time range name must start with letter or number, and
the length cannot exceed 32 characters long.
Command Mode: Global mode
Default: No time-range configuration.
Usage Guide: None
Examples: Create a time-range named dc_timer.
Switch(config)#Time-range dc_timer
To Next Page
Loading...
