FoxGate S6124 - Show Tftp; Tftp-Server Enable; Tftp-Server Retransmission-Number

62
Command mode: Admin and Configuration Mode.
Default: No display by default.
Example:
Switch#show ftp
Timeout : 600
Displayed information
Description
Timeout
Timeout time.
1.5.8 show tftp
Command: show tftp
Function: Display the parameter settings for the TFTP server.
Default: No display by default.
Command mode: Admin and Configuration Mode.
Example:
Switch#show tftp
timeout : 60
Retry Times : 10
Displayed information
Explanation
Timeout
Timeout time.
Retry Times
Retransmission times.
1.5.9 tftp-server enable
Command: tftp-server enable
no tftp-server enable
Function: Start TFTP server, the ―no ftp-server enable‖ command shuts down TFTP
server and prevents TFTP user from logging in.
Default: TFTP server is not started by default.
Command mode: Global Mode
Usage Guide: When TFTP server function is enabled, the switch can still perform tftp
client functions. TFTP server is not started by default.
Example: Enable TFTP server service.
Switch#config
Switch(config)#tftp-server enable
Relative Command: tftp-server timeout
1.5.10 tftp-server retransmission-number