FoxGate S6124 - Show Ip Traffic

171
Parameter: None
Default: IP packet debugging information is disabled by default.
Command mode: Admin Mode
Usage Guide: Displays statistics for IP packets received/sent, including
source/destination address and bytes, etc.
Example: Enabling IP packet debug.
Switch#debug ip packet
IP PACKET: rcvd, src1.1.1.1, dst1.1.1.2, size 100
15.1.5 show ip traffic
Command: show ip traffic
Function: Display statistics for IP packets.
Command mode: Admin Mode
Usage Guide: Display statistics for IP, ICMP, TCP, UDP packets received/sent.
Example:
Switch#show ip traffic
IP statistics:
Rcvd: 3249810 total, 3180 local destination
0 header errors, 0 address errors
0 unknown protocol, 0 discards
Frags: 0 reassembled, 0 timeouts
0 fragment rcvd, 0 fragment dropped
0 fragmented, 0 couldn't fragment, 0 fragment sent
Sent: 0 generated, 3230439 forwarded
0 dropped, 0 no route
ICMP statistics:
Rcvd: 0 total 0 errors 0 time exceeded
0 redirects, 0 unreachable, 0 echo, 0 echo replies
0 mask requests, 0 mask replies, 0 quench
0 parameter, 0 timestamp, 0 timestamp replies
Sent: 0 total 0 errors 0 time exceeded
0 redirects, 0 unreachable, 0 echo, 0 echo replies
0 mask requests, 0 mask replies, 0 quench
0 parameter, 0 timestamp, 0 timestamp replies
TCP statistics:
TcpActiveOpens 0, TcpAttemptFails 0
TcpCurrEstab 0, TcpEstabResets 0