FoxGate S6124 - Show Port-Security

131
Parameter: None.
Command mode: Global Mode.
Default: Disable.
Usage Guide: The user enables this function to obtain the status of the MAC changing or
the accessed user.
Example: Enable the monitor function for MAC.
Switch(Config)#mac-address-table synchronizing enable
11.2.4 show port-security
Command: show port-security
Function: Display the secure MAC addresses of the port.
Command mode: Admin Mode and other configuration Mode.
Default: The switch is not display port-security configuration.
Usage Guide: This command displays the secure port MAC address information.
Example:
Switch#show port-security
Security Port MaxSecurity Addr CurrentAddr Security Action
(count) (count)
-----------------------------------------------------------------------------------------------------
Ethernet1/1 1 1 Protect
Ethernet1/3 10 1 Protect
Ethernet1/5 1 0 Protect
-----------------------------------------------------------------------------------------------------
Max Addresses limit in System :128
Total Addresses in System :2
Displayed information
Explanation
Security Port
Is port enabled as a secure port.
MaxSecurityAddr
The maximum secure MAC address number set for the
security port.
CurrentAddr
The current secure MAC address number of the security
port.
Security Action
The violation mode of the port configuration.
Total Addresses in System
The current secure MAC address number of the system.
Max Addresses limit in
System
The maximum secure MAC address number of the system.