FoxGate S6124 - Show Tech-Support; Show Udp; Show Version

376
41.18 show tech-support
Command: show tech-support
Function: Display various information about the switch and the running tasks. This
command is used to diagnose the switch by the technical support specialist.
Command Mode: Admin mode and configuration mode
Usage Guide: When failure occurred on the switch, this command can be used to get
related information, in order to diagnose the problems.
Example:
Switch#show tech-support
41.19 show udp
Command: show udp
Function: Display the current UDP connection status established to the switch.
Command mode: Admin Mode
Example:
Switch#show udp
LocalAddress LocalPort ForeignAddress ForeignPort State
0.0.0.0 161 0.0.0.0 0 CLOSED
0.0.0.0 123 0.0.0.0 0 CLOSED
0.0.0.0 1985 0.0.0.0 0 CLOSED
Displayed information
Description
LocalAddress
Local address of the UDP connection.
LocalPort
Local pot number of the UDP connection.
ForeignAddress
Remote address of the UDP connection.
ForeignPort
Remote port number of the UDP connection.
State
Current status of the UDP connection.
41.20 show version
Command: show version
Function: Display the switch version.
Command mode: Admin Mode