FoxGate S6124 - Show Debugging; Show Flash; Show History

371
41.7 show debugging
Command: show debugging {l4 | l4drv | lldp | nsm | other | spanning-tree}
Function: Display the debug switch status.
Usage Guide: If the user needs to check what debug switches have been enabled, show
debugging command can be executed.
Command mode: Admin Mode
Example: Check for currently nsm debug switch state.
Switch#show debugging nsm
NSM debugging status
Relative command: debug
41.8 show flash
Command: show flash
Function: Show the size of the files which are reserved in the system flash memory.
Command Mode: Admin Mode and Configuration Mode.
Example: To list the files and their size in the flash.
Switch#show flash
boot.rom 329,828 1900-01-01 00:00:00 --SH
boot.conf 94 1900-01-01 00:00:00 --SH
nos.img 2,449,496 1980-01-01 00:01:06 ----
startup-config 2,064 1980-01-01 00:30:12 ----
41.9 show history
Command: show history
Function: Display the recent user command history.
Command mode: Admin Mode
Usage Guide: The system holds up to 20 commands the user entered, the user can use
the UP/DOWN key or their equivalent (ctrl+p and ctrl+n) to access the command history.
Example:
Switch#show history
enable
config
interface ethernet 1/3