35
1.2 Commands for Telnet
1.2.1 authentication ip access-class
Command: authentication ip access-class {<num-std>|<name>}
no authentication ip access-class
Function: Binding standard IP ACL protocol to login with Telnet/SSH/Web; the no form
command will cancel the binding ACL.
Parameters: <num-std> is the access-class number for standard numeric ACL, ranging
between 1-99; <name> is the access-class name for standard ACL, the character string
length is ranging between 1-32.
Default: The binding ACL to Telnet/SSH/Web function is closed by default.
Command Mode: Global Mode.
Example: Binding standard IP ACL protocol to access-class 1.
Switch(config)#authentication ip access-class 1 in
1.2.2 authentication ipv6 access-class
Command: authentication ipv6 access-class {<num-std>|<name>}
no authentication ipv6 access-class
Function: Binding standard IPv6 ACL protocol to login with Telnet/SSH/Web; the no form
command will cancel the binding ACL.
Parameters: <num-std> is the access-class number for standard numeric ACL, ranging
between 500-599; <name> is the access-class name for standard ACL, the character
string length is ranging between 1-32.
Default: The binding ACL to Telnet/SSH/Web function is closed by default.
Command Mode: Global Mode.
Example: Binding standard IP ACL protocol to access-class 500.
Switch(config)#authentication ipv6 access-class 500 in
1.2.3 authentication line login
Command: authentication line {console | vty | web} login {local | radius | tacacs}
no authentication line {console | vty | web} login
Function: Configure VTY (login with Telnet and SSH), Web and Console, so as to select
the priority of the authentication mode for the login user. The no form command restores
To Next Page
Loading...
