FoxGate S6124 - Show Port-Security Address; Show Port-Security Interface

132
11.2.5 show port-security address
Command: show port-security address [interface <interface-id>]
Function: Display the secure MAC addresses of the port.
Command mode: Admin Mode and other configuration Mode.
Parameter: <interface-id > stands for the port to be displayed.
Usage Guide: This command displays the secure port MAC address information, if no
port is specified, secure MAC addresses of all ports are displayed. The following is an
example:
Switch#show port-security address interface ethernet 1/3
Security Mac Address Table
--------------------------------------------------------------------------------------------------
Vlan Mac Address Type Ports
1 0000.0000.1111 SecureConfigured Ethernet1/1
--------------------------------------------------------------------------------------------------
Total Addresses : 1
Displayed information
Explanation
Vlan
The VLAN ID for the secure MAC Address.
Mac Address
Secure MAC address.
Type
Secure MAC address type.
Ports
The port that the secure MAC address
belongs to.
Total Addresses
Current secure MAC address number in the
system.
11.2.6 show port-security interface
Command: show port-security interface <interface-id>
Function: Display the configuration of secure port.
Command mode: Admin Mode and other configuration Mode.
Parameter: <interface-id > stands for the port to be displayed.
Default: Configuration of secure ports is not displayed by default.
Usage Guide: This command displays the detailed configuration information for the
secure port.