380
42.3 show reload
Command: show reload
Function: Display the user‘s configuration of command ―reload after‖.
Parameters: None.
Command Mode: Admin and configuration mode
Usage Guide: With this command, users can view the configuration of command ―reload
after‖ and check how long a time is left before rebooting the switch.
Example: View the configuration of command ―reload after‖. In the following case, the
user set the switch to be rebooted in 10 hours and 1 second, and there are still 9 hours 59
minutes and 48 seconds left before rebooting it.
Switch#show reload
The original reload after configuration is 10:00:01.
System will be rebooted after 09:59:48 from now.
Related Commands: reload, reload after, reload cancel
To Next Page
Loading...
