71
Function: Enable the debug information; the no command disables the debug switch.
Parameters: DP: discovery messages.
DR: responsive messages.
CP: command messages.
receive: receive messages.
send: send messages.
Default: None.
Command Mode: Admin Mode.
Usage Guide: Enable the debug information of cluster messages. After enabling
classification, all DP, DR and CP messages sent or received in the cluster will be printed.
Example: Enable the debug information of receiving DP messages.
Switch#debug cluster packets DP receive
2.14 show cluster
Command: show cluster
Function: Display cluster information of the switch.
Command Mode: Admin and Configuration Mode.
Example: Execute this command on switches of different roles.
----in a commander----------------------------
Switch#show cluster
Status: Enabled
Cluster VLAN: 1
Role: commander
IP pool: 10.254.254.1
Cluster name: MIS_zebra
Keepalive interval: 30
Keepalive loss-count: 3
Auto add: Disabled
Number of Members: 0
Number of Candidates: 3
----in a member ----------------------------
Switch#show cluster
Status: Enabled
Cluster VLAN: 1
Role: Member
Commander Ip Address: 10.254.254.1
To Next Page
Loading...
