FoxGate S6124 - Show Ipv6 Route

180
ND DAD is enabled, number of DAD attempts is 1
ND managed_config_flag is unset
ND other_config_flag is unset
ND NS interval is 1 second(s)
ND router advertisements is disabled
ND RA min-interval is 200 second(s)
ND RA max-interval is 600 second(s)
ND RA hoplimit is 64
ND RA lifetime is 1800 second(s)
ND RA MTU is 0
ND advertised reachable time is 0 millisecond(s)
ND advertised retransmit time is 0 millisecond(s)
Displayed information
Explanation
Vlan1
Layer 3 interface name
[up/up]
Layer 3 interface status
dev index
Internal index No.
fe80::203:fff:fe00:10
Automatically configured IPv6 address of Layer
3 interface
3001::1
Configured IPv6 address of Layer 3 interface
15.2.11 show ipv6 route
Command: show ipv6 route [database]
Function: Display IPv6 routing table.
Parameter: database is router database.
Default Situation: None.
Command Mode: Admin and Configuration Mode.
Usage Guide: show ipv6 route only shows IPv6 kernal routing table (routing table in
tcpip), database shows all routers except the local router.
Example:
Switch#show ipv6 route
Codes: C - connected, L - Local, S - static, R - RIP, O - OSPF,
I - IS-IS, B - BGP
C ::/0 via ::, tunnel3 256
S 2001:2::/32 via fe80::789, Vlan2 1024