FoxGate S6124 - Show Cluster Members

72
Internal Ip Address: 10.254.254.2
Commamder Mac Address: 00-12-cf-39-1d-90
---- a candidate ----------------------------
Switch#show cluster
Status: Enabled
Cluster VLAN: 1
Role: Candidate
---- disabled ----------------------------
Switch#show cluster
Status: Disabled
2.15 show cluster members
Command: show cluster members [id <member-id> | mac-address <mac-addr>]
Function: Display member information of a cluster. This command can only apply to
commander switches.
Parameters: member-id: member id of the switch.
mac-addr: the CPU mac addresses of member switches.
Default: No parameters means to display information of all member switches.
Command Mode: Admin and Configuration Mode.
Usage Guide: Executing this command on a commander switch will display the
configuration information of all cluster member switches.
Example: Execute this command on a commander switch to display the configuration
information of all and specified cluster member switches.
Switch#show cluster members
Member From : User config(U); Auto member (A)
ID From Status Mac Hostname Description Internal IP
--- - ----------- ----------------- ------------ ------------ ---------------
xxx x xxxxxxxxxx12 xx-xx-xx-xx-xx-xx xxxxxxxxxx12 xxxxxxxxxx12 xxx.xxx.xxx.xxx
1 U Inactive 00-01-02-03-04-05 MIS_zebra S6208 10.254.254.2
2 A Active 00-01-02-03-04-05 MIS_bison S6208 10.254.254.3
3 U Active 00-01-02-03-04-05 SRD_jaguar S6224 10.254.254.4
4 A Inactive 00-01-02-03-04-05 HRD_puma S9820 10.254.254.5
----
Switch#show cluster members id 1
Cluster Members:
ID: 1