FoxGate S6124 - Show Snmp

47
Example:
Enable RMON.
Switch(config)#rmon enable
Disable RMON.
Switch(config)#no rmon enable
1.4.4 show snmp
Command: show snmp
Function: Display all SNMP counter information.
Command mode: Admin and Configuration Mode.
Example:
Switch#show snmp
0 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs
0 Set-request PDUs
0 SNMP packets output
0 Too big errors (Max packet size 1500)
0 No such name errors
0 Bad values errors
0 General errors
0 Get-response PDUs
0 SNMP trap PDUs
Displayed information
Explanation
snmp packets input
Total number of SNMP packet inputs.
bad snmp version errors
Number of version information error
packets.
unknown community name
Number of community name error
packets.
illegal operation for community name
Number of permission for community