FoxGate S6124 - Show Ip Dhcp Snooping Binding All

243
Displayed Information
Explanation
interface
The name of port
trust attribute
The truest attributes of the port
action
The automatic defense action of the
port
recovery interval
The automatic recovery time of the port
maxnum of alarm info
The max number of automatic defense
actions that can be recorded by the port
binding dot1x
Whether the binding dot1x function is
enabled on the port
binding user
Whether the binding user function is
enabled on the port.
Alarm info
The number of alarm information.
Binding info
The number of binding information.
Expired Binding
The expired binding information
Request Binding
REQUEST information
22.24 show ip dhcp snooping binding all
Command: show ip dhcp snooping binding all
Function: Display the current global binding information of DHCP snooping.
Parameters: None.
Command Mode: Admin and Configuration Mode.
Default Settings: None.
Usage Guide: This command can check the global binding information of DHCP
snooping, each table entry includes the corresponding MAC address, IP address, port
name, VLAN ID and the flag of the binding state.
Example:
switch#show ip dhcp snooping binding all
ip dhcp snooping static binding count:1169, dynamic binding count:0
MAC IP address Interface Vlan ID Flag
--------------------------------------------------------------------------
00-00-00-00-11-11 192.168.40.1 Ethernet1/1 1 S
00-00-00-00-00-10 192.168.40.10 Ethernet1/2 1 D