FoxGate S6124 - Show Ip Route

173
0 mask requests, 0 mask replies,
0 quench
0 parameter, 0 timestamp, 0
timestamp replies
TCP statistics:
TCP packet statistics.
TcpActiveOpens 0,TcpAttemptFails 0
TcpCurrEstab 0, TcpEstabResets 0
TcpInErrs 0, TcpInSegs 3180
TcpMaxConn 0, TcpOutRsts 3
TcpOutSegs 3, TcpPassiveOpens 8
TcpRetransSegs 0, TcpRtoAlgorithm 0
TcpRtoMax 0, TcpRtoMin 0
Active open the connection number,
attempt fail number.
Current establish the connection number,
establish reset number.
Receive error packeages, receive
packeage number in segment.
The max connection number, output reset
number.
Output segment packeage number,
passive connection number.
Retransfer packeage number, retransfer
the time of timer.
Retransfer the max time is allowed by
timer, retransfer the min time is allowed
by timer.
UDP statistics:
UDP packet statistics.
UdpInDatagrams 0,UdpInErrors 0
UdpNoPorts 0, UdpOutDatagrams 0
Receive UDP data packets, receive error
data packets.
No port packeage number, seng
packeage number.
15.1.6 show ip route
Command: show ip route [database]
Function: Display routing table.
Parameter: database is database information.
Command Mode: Admin Mode.
Usage Guide: Show kernal routing table, include: routing type, destination network, mask,
next-hop address, interface, etc.
Example:
Switch#show ip route
Codes: C - connected, S - static, R - RIP derived, O - OSPF derived
A - OSPF ASE, B - BGP derived