137
Chapter 12 Commands for MSTP
12.1 Commands for MSTP
12.1.1 abort
Command: abort
Function: Abort the current MSTP region configuration, quit MSTP region mode and
return to global mode.
Command mode: MSTP Region Mode.
Usage Guide: This command is to quit MSTP region mode without saving the current
configuration. The previous MSTP region configuration is valid.
Example: Quit MSTP region mode without saving the current configuration.
Switch(Config-Mstp-Region)#abort
Switch(config)#
12.1.2 exit
Command: exit
Function: Save current MSTP region configuration, quit MSTP region mode and return to
global mode.
Command mode: MSTP Region Mode
Usage Guide: This command is to quit MSTP region mode with saving the current
configuration.
Example: Quit MSTP region mode with saving the current configuration.
Switch(Config-Mstp-Region)#exit
Switch(config)#
12.1.3 instance vlan
Command: instance <instance-id> vlan <vlan-list>
no instance <instance-id> [vlan <vlan-list>]
Function: In MSTP region mode, create the instance and set the mappings between
VLANs and instances; the command ―no instance <instance-id> [vlan <vlan-list>]‖
removes the specified instance and the specified mappings between the VLANs and
instances.
Parameter: Normally, <instance-id> sets the instance number. The valid range is from 0
To Next Page
Loading...
