108
7.16 show debugging lldp
Command: show debugging lldp
Function: Display all ports with lldp debug enabled.
Parameters: None.
Default: None.
Command Mode: Admin and Configuration Mode.
Usage Guide: With show debugging lldp, all ports with lldp debug enabled will be
displayed.
Example: Display all ports with lldp debug enabled.
Switch(config)#show debugging lldp
====BEGINNING OF LLDP DEBUG SETTINGS====
debug lldp
debug lldp packets interface Ethernet1/1
debug lldp packets interface Ethernet1/2
debug lldp packets interface Ethernet1/3
debug lldp packets interface Ethernet1/4
debug lldp packets interface Ethernet1/5
=============END OF DEBUG SETTINGS===============
7.17 debug lldp
Command: debug lldp
no debug lldp
Function: Enable the debug information of LLDP function, the no operation of this
command will disable the debug information of LLDP function.
Parameters: None.
Default: Disable the debug information of LLDP function.
Command Mode: Admin Mode.
Usage Guide: When the debug switch is enabled, users can check the receiving and
sending of packets and other information.
Example: Enable the debug switch of LLDP function on the switch.
Switch(config)#debug lldp
To Next Page
Loading...
