317
Command Mode: Global Mode
Usage Guide: None.
Example: Delete all configured IP address pools.
Switch(config)#no am all ip-pool
30.6 show am
Command: show am [interface <interface-name>]
Function: Display the configured AM entries.
Parameters: <interface-name> is the name of the interface of which the configuration
information will be displayed. No parameter means to display the AM configuration
information of all interfaces.
Command Mode: Admin and Configuration Mode.
Example: Display all configured AM entries.
Switch#show am
AM is enabled
Interface Ethernet1/3
am interface
am ip-pool 30.10.10.1 20
Interface Ethernet1/5
am interface
am ip-pool 50.10.10.1 30
am mac-ip-pool 00-02-04-06-08-09 20.10.10.5
am ip-pool 50.20.10.1 20
Interface Ethernet1/6
am interface
Interface Ethernet1/1
am interface
am ip-pool 10.10.10.1 20
am ip-pool 10.20.10.1 20
Display the AM configuration entries of ehternet1/5 of the switch.
Switch#show am interface ethernet 1/5
AM is enabled
Interface Etherne1/5
To Next Page
Loading...
