FoxGate S6124 - Show Ipv6 Access-Lists; Show Time-Range

295
Switch#show firewall
Firewall status: Enable.
Firewall default rule: Permit
Displayed information
Explanation
fire wall is enable
Packet filtering function enabled
the default action of firewall is permit
Default packet filtering function is permit
27.26 show ipv6 access-lists
Command: show ipv6 access-lists [<num>|<acl-name>]
Function: Show the configured IPv6 access control list.
Parameter:<num> is the number of specific access control list, the valid range is 500～
699,amongst 500～599 is digit standard IPv6 ACL number,600～699 is the digit extended
IPv6 ACL number;<acl-name> is the nomenclature character string of a specific access
control list, lengthening within 1～32.
Default: None.
Command Mode: Admin and Configuration Mode.
Usage Guide: When no access control list is specified, all the access control lists will be
displayed; in used x time（s） is shown the times the ACL had been quoted.
Example:
Switch #show ipv6 access-lists
ipv6 access-list 500(used 1 time(s))
ipv6 access-list 500 deny any-source
ipv6 access-list 510(used 1 time(s))
ipv6 access-list 510 deny ip any any-destination
ipv6 access-list 510 deny tcp any any-destination
ipv6 access-list 520(used 1 time(s))
ipv6 access-list 520 permit ip any any-destination
27.27 show time-range
Command: show time-range <word>