FoxGate S6124 - Show Ipv6 Traffic

183
Displayed information
Explanation
IPv6 Addres
Neighbor IPv6 address
Link-layer Addr.
Neighbor MAC address
Interface
Exit interface name
Port
Exit interface name
State
Neighbor status (reachable、statle、delay、
probe、permanent、incomplete、unknow)
15.2.13 show ipv6 traffic
Command: show ipv6 traffic
Function: Display IPv6 transmission data packets statistics information.
Parameter: None
Default: None
Command Mode: Admin and Configuration Mode
Example:
Switch#show ipv6 traffic
IP statistics:
Rcvd: 90 total, 17 local destination
0 header errors, 0 address errors
0 unknown protocol, 13 discards
Frags: 0 reassembled, 0 timeouts
0 fragment rcvd, 0 fragment dropped
0 fragmented, 0 couldn't fragment, 0 fragment sent
Sent: 110 generated, 0 forwarded
0 dropped, 0 no route
ICMP statistics:
Rcvd: 0 total 0 errors 0 time exceeded
0 redirects, 0 unreachable, 0 echo, 0 echo replies
Displayed information
Explanation
IP statistics
IPv6 data report statistics
Rcvd: 90 total, 17 local
destination0 header errors, 0
address errors0 unknown protocol,
13 discards
IPv6 received packets statistics