FoxGate S6124 - Page 58

58
method ） .When URL represents an FTP address, its form should be:
ftp://<username>:<password>@{<ipaddress>|<ipv6address>|<hostname> }/<filename>,a
mongst <username> is the FTP user name,<password> is the FTP user
password,<ipaddress>|<ipv6address> is the IPv4 or IPv6 address of the FTP
server/client,<hostname> is the name of the host mapping with the IPv6 address,it does
not support the file download and upload with hosts mapping with IPv4
addresses,<filename> is the name of the FTP upload/download file.
Special keywords of the filename
Keywords
Source or destination addresses
running-config
Running configuration files
startup-config
Startup configuration files
nos.img
System files
nos.rom
System startup files
Command Mode: Admin Mode.
Usage Guide: This command supports command line hints, namely if the user can enter
commands in following forms: copy <filename> ftp:// or copy ftp:// <filename> and
press Enter, following hints will be provided by the system：
ftp server ip/ipv6 address [x.x.x.x]/[x:x::x:x] >
ftp username>
ftp password>
ftp filename>
Requesting for FTP server address, user name, password and file name
Examples:
(1) Save images in the FLASH to the FTP server of 10.1.1.1, FTP server username is
Switch, password is superuser
Switch#copy nos.img ftp://Switch:superuser@10.1.1.1/nos.img
(2) Obtain system file nos.img from the FTP server 10.1.1.1, the username is Switch,
password is superuser
Switch#copy ftp://Switch:superuser@10.1.1.1/nos.img nos.img
(3) Save images in the FLASH to the FTP server of 2004:1:2:3::6
Switch#copy nos.img ftp://username:password@2004:1:2:3::6/ nos.img
(4) Obtain system file nos.img from the FTP server 2004:1:2:3::6
Switch#copy ftp:// username:password@2004:1:2:3::6/nos.img nos.img