74
No parameters means to display all topology information.
Command Mode: Admin and Configuration Mode.
Usage Guide: Executing this command on the commander switch will display the
topology information with its starting node specified.
Example: Execute this command on the commander switch to display the topology
information under different conditions.
Switch#show cluster topology
Role: commander(CM);Member(M);Candidate(CA);Other commander(OC);Other
member(OM)
LV SN Description Hostname Role MAC_ADDRESS Upstream Upstream
leaf
local-port remote-port node
== ============ ============ == ================= ============
============ =
x xxx xxxxxxxxxx12 xxxxxxxxxx12 xx xx-xx-xx-xx-xx-xx xxxxxxxxxx12 xxxxxxxxxx12 x
1 1 ES4626H LAB_SWITCH_1 CM 01-02-03-04-05-01 -root- -root- -
2 ES4626H LAB_SWITCH_2 M 01-02-03-04-05-02 eth 1/1 eth 1/2 N
3 ES4626H LAB_SWITCH_3 CA 01-02-03-04-05-03 eth 1/1 eth 1/3 Y
4 ES4626H LAB_SWITCH_4 CA 01-02-03-04-05-04 eth 1/1 eth 1/4 Y
................................................................................
2 2 ES4626H LAB_SWITCH_2 M 01-02-03-04-05-02 eth 1/1 eth 1/2 -
5 ES3528M LAB_SWITCH_1 OC 01-02-03-04-05-13 eth 1/1 eth 1/2 Y
6 ES3528M LAB_SWITCH_1 OM 01-02-03-04-05-14 eth 1/1 eth 1/3 Y
----------------------------------------------------------
Switch#show cluster topology root-sn 2
Role: commander(CM);Member(M);Candidate(CA);Other commander(OC);Other
member(OM)
SN Description Hostname Role MAC_ADDRESS Upstream Upstream
leaf
local-port remote-port node
== ============ ============ == ================= ============
============ =
* 2 ES4626H LAB_SWITCH_2 M 01-02-03-04-05-02 eth 1/1 eth 1/2 -
5 ES3528M LAB_SWITCH_1 OC 01-02-03-04-05-13 eth 1/1 eth 1/2 Y
6 ES3528M LAB_SWITCH_1 OM 01-02-03-04-05-14 eth 1/1 eth 1/3 Y
To Next Page
Loading...
