Printing Basics 185
c In the left navigation panel, scroll down to Security and select SSL/TLS Server Communication.
d Click Certificate Management to display the Certificate Management page.
NOTE:
• The Certificate Management button is displayed only when the optional hard disk unit is installed and Data
Encryption is set to On.
e Select Trusted Certificate Authorities within Category.
f Select the purpose of use from the Certificate Purpose list.
g Click Display the List to display the Certificate List page.
h Select the certificate to associate. At this time, confirm that Validity of the certificate selected is set to
Valid.
i Click Certificate Details to display the Certificate Details page.
j Confirm the content, and click Use this certificate at the upper-right corner.
3 Confirm whether the certificate is set correctly.
a Launch CentreWare Internet Services.
b Click the Properties tab.
c In the left navigation panel, scroll down to Security and select SSL/TLS Server Communication.
d Click Certificate Management to display the Certificate Management page.
NOTE:
• The Certificate Management button is displayed only when the optional hard disk unit is installed and Data
Encryption is set to On.
e Select the category from the Category list.
f Select Wireless LAN (Server) from the Certificate Purpose list.
g From Certificate Order, select how the certificates are sorted in Certificate List. This setting is not
necessary if you do not need to specify the order for the certificates.
h Click Display the List to display the Certificate List page.
i The certificate displayed with an asterisk as "*Valid" in the Validity column is the certificate associated with
the use purpose and actually used.
4 Set WPA-Enterprise for PEAPV0-MS-CHAPV2, EAP-TTLS PAP, or EAP-TTLS CHAP.
a Launch CentreWare Internet Services.
b Click the Properties tab.
c In the left navigation panel, scroll down to Port Settings and select Wireless.
NOTE:
• This setting is available only when the optional wireless printer adapter is installed.
d
Select either of the following from the Encryption list of Security Settings.
• WPA-Enterprise-AES/WPA2-Enterprise-AES
• WPA-Enterprise-TKIP
NOTE:
• WPA-Enterprise-AES/WPA2-Enterprise-AES or WPA-Enterprise-TKIP becomes available only when the following
steps are set correctly.
- Importing a Digital Certificate
- Setting a Digital Certificate
- Confirming the Settings of a Digital Certificate
e
Set EAP-Identity, Login Name, and Password of WPA-Enterprise.
f Select either of the following from the Authentication Method list of WPA-Enterprise:
• PEAPV0 MS-CHAPV2
• EAP-TTLS PAP
• EAP-TTLS CHAP
g Click Apply.
To Next Page
Loading...
Need help?
General
