186 Printing Basics
Setting Client Certificate for IEEE 802.1x (EAP-TLS)
NOTE:
• To manage digital certificates, you must first set encryption of the optional hard disk unit to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates" on page 174.
• This feature is enabled only when Enable is set for IEEE 802.1x (EAP-TLS).
1 Import a certificate to be used with SSL Client.
See also:
• "Importing a Digital Certificate" on page 176
2 Set a certificate to be used with SSL Client.
See also:
• "Setting a Digital Certificate" on page 177
3 Confirm whether the certificate is set correctly.
See also:
• "Confirming the Settings of a Digital Certificate" on page 178
4 After restarting the printer, the IEEE 802.1x (EAP-TLS) certificate is presented when IEEE 802.1x
communication with the RADIUS server starts. When the RADIUS server is set to require a client certificate,
the client certificate provided by the printer is verified by the RADIUS server.
To Next Page
Loading...
Need help?
General
