66 Basic Operation
13 After loading paper in the optional 550 sheet feeder, specify the paper type from the printer operator panel.
a Press the (System) button.
b Select the Tools tab, and then select Tray Management.
c Select Tray Settings.
d Select Tray 2.
e Select Size.
f Select the desired paper size.
g Select Type.
h Select the desired paper type.
i Select OK.
14 If you installed the optional 550 sheet feeder after installing the print driver, update your driver by following the
instructions for each operating system. If the printer is on a network, update the driver for each client.
Updating Your Driver to Detect Optional 550 Sheet Feeder
For details, see "Updating Your Driver to Detect Optional 550 Sheet Feeder" on page 61.
To Next Page
Loading...
