74 Basic Operation
b Select Report / List.
c Select System Settings, and select that report or list.
d Select Print.
The System Settings page is printed.
11 Confirm the amount of Hard Disk listed under Printer Options in the System Settings page.
If the Hard Disk is not listed, turn off the printer, unplug the power cord, and re-install the hard disk unit.
12 If you installed the hard disk unit after installing the print driver, update your driver by following the instructions
for the operating system you are using. If the printer is on a network, update the driver for each client.
hard disk unit can be specified on the print driver only when Hard Disk or RAM Disk is available on the print
driver.
To Next Page
Loading...
Need help?
General
