Fujitsu PRIMERGY BX900 - Page 171

© 2011 Fujitsu Technology Solutions
Error Message Incorrect input! Use 'sntp server <ipaddress/domain-name>
<addresstype> [<priority> [<version> [<port>]]]'.
Explanation User input incomplete command.
Recommended Action Use 'sntp server <ipaddress/domain-name> <addresstype>
[<priority> [<version> [<port>]]]'.
Error Message Incorrect input! Use 'sntp broadcast client poll-interval <6 - 10>’
Explanation Incomplete command for this function.
Recommended Action Use complete command ‘sntp broadcast client poll-interval <6 -
10>’
Error Message Incorrect input! Use 'sntp unicast client poll-interval <6 - 10>’
Explanation Incomplete command for this function.
Recommended Action Use complete command ‘sntp unicast client poll-interval <6 -
10>’
Error Message Incorrect input! Use 'sntp unicast client poll-timeout <1 - 30>’
Explanation Incomplete command for this function.
Recommended Action Use complete command ‘sntp unicast client poll-timeout <1 -
30>’
Error Message Could not set poll timeout value.
Explanation The timeout value is out of the range.
Recommended Action Correct command ‘sntp unicast client poll-timeout <1 - 30>’
Error Message Incorrect input! Use sntp unicast client poll-retry <0 - 10>’
Explanation Incomplete command for this function.
Recommended Action Use complete command ‘sntp unicast client poll-retry <0 - 10>’
Error Message Could not set poll retry value.
Explanation The retry value is out of the range.
Recommended Action Correct command ‘sntp unicast client poll-retry <0 - 10>’
Error Message Incorrect input! Use 'sntp server
<ipaddress/ipv6address/domain-name> <addresstype>
[<priority> [<version> [<port>]]]'.
Explanation Incomplete command for this function.
Recommended Action Use complete command ‘sntp server
<ipaddress/ipv6address/domain-name> <addresstype>
[<priority> [<version> [<port>]]]'.