© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message Failed to malloc pSysapiCfgTree[INDEX]
Explanation Memory allocation is failed.
Recommended Action The system is failed to init.
Severity Level 6
Error Message Could not separate SYSAPI_CONFIG_FILENAME
Explanation Configuration file separation is failed.
Recommended Action The configuration file is wrong and need to check again.
Severity Level 6
Error Message Configuration file FILENAME size is 0 (zero) bytes.
Explanation Getting configuration file size is failed.
Recommended Action The configuration file corrupts or does not exists instead of the
factory default.
Severity Level 6
Error Message Failed to read config file FILENAME header
Explanation Configuration file read fail.
Recommended Action The config file is corrupted instead of the factory default.
Severity Level 6
Error Message Version Check Failed.
Explanation Wrong configuration file version.
Recommended Action The configuration file needs to be verified.
Severity Level 6
Error Message Configuration file on disk size SIZE1 is less than expected size
SIZE2.
Explanation Wrong configuration file size.
Recommended Action The configuration file is corrupted instead of the factory default.
Severity Level 6
Error Message sysapiCfgFilesSeparate: CRC check failed. CHECKSUM1 read
and CHECKSUM2 calculated.
Explanation Wrong configuration file checksum value.
Recommended Action The configuration file is not matched and need to be checked.
Severity Level 6
Error Message File FILENAME1 hdr name = FILENAME2 is invalid.
Explanation Wrong configuration file name.
Recommended Action The configuration file name is wrong and need to be checked.
To Next Page
Loading...
