Fujitsu PRIMERGY BX900 - Page 20

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message Failed to allocate SIZE for config file FILENAME
Explanation Memory allocate fail.
Recommended Action The configure file is corrupted instead of the factory default.
Severity Level 6
Error Message File FILENAME: same version (VERSION1) but the sizes
(SIZE1->SIZE2) differ.
Explanation Wrong configuration file size.
Recommended Action The configuration file is not matched and need to be checked.
Severity Level 6
Error Message File FILENAME corrupted from file system. Checksum
mismatch.
Explanation Wrong configuration file checksum value.
Recommended Action The configuration file is not matched and need to be checked.
Severity Level 6
Error Message Error on call to sysapiCfgFileWrite routine on file FILENAME.
Explanation Configuration file write fail.
Recommended Action The configuration file is not matched and need to be checked.
Severity Level 6
Error Message pSysapiCfgTree[INDEX] is NULL
Explanation Configuration file index gets fail.
Recommended Action The configuration file is not matched and need to be checked.
Severity Level 6
Error Message Out of system buffers.
Explanation Netowk mbuf gets fail.
Recommended Action The system is still crashed.
Severity Level 6
Error Message nvStore registrar_ID greater than NVSTORE_USER_LAST.
Explanation Component save routine registers fail.
Recommended Action System is abnormal and suggests to reboot the system.