Fujitsu PRIMERGY BX900 - Page 22

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message Bad rc on config dump call to registrar_ID ID
Explanation Bad return value on notify configure dump call.
Recommended Action The restore process was failed and need to check the
configuration file availability.
Severity Level 6
Error Message Bad rc on debug dump call to registrar_ID ID
Explanation Bad return value on notify debug dump call.
Recommended Action The restore process was failed and need to check the availability
of the configuration file.
Severity Level 6
Error Message Error on call to osapiFsWrite routine on file FILE
Explanation Configuration file writes fail.
Recommended Action The configuration file is corrupted instead of the factory_default.
Severity Level 6
Error Message File FILE corrupted from file system. Checksum mismatch.
Explanation Configuration file checksum error.
Recommended Action The configuration file is corrupted instead of the factory default.
Severity Level 6
Error Message Migrating config file FILE from version NUMBER1 to NUMBER2.
Explanation Configuration file migration is failed.
Recommended Action The configuration file is corrupted instead of the factory default.
Severity Level 6
Error Message Failed to get sizeof Config file FILENAME.
Explanation Wrong file size.
Recommended Action The configuration file is corrupted instead of the factory default.
Severity Level 6
Error Message sysapiCfgFileIndexGet (FILENAME) failed.
Explanation Wrong file index.
Recommended Action The configuration file is corrupted instead of the factory default.