© 2011 Fujitsu Technology Solutions
Error Message Invalid ACL Name. Name string may include alphabetic,
numeric, dash, dot or underscore characters only. Name must
start with a letter and the size of the name string must be less
than or equal to 31 characters.
Explanation User input invalid format of MAC ACL name.
Recommended Action Name string may include alphabetic, numeric, dash, dot or
underscore characters only. Name must start with a letter and
the size of the name string must be less than or equal to 31
characters.
Error Message Incorrect input! The maximum of 100 ACLs is already
configured.
Explanation User attempt to create an ACL when table is full.
Recommended Action Maximum 100 ACLs can be created.
Error Message MAC Access-list does not exist.
Explanation User attempt to delete a non-exist MAC access-list.
Recommended Action Make sure the MAC access-list is exist.
Error Message Incorrect input! Use 'mac access-group <name> in
[<sequence>]'.
Explanation User input incomplete command.
Recommended Action Use 'mac access-group <name> in [<sequence>]'.
Error Message Incorrect input! Use 'no mac access-group <name> in
[<sequence>]'.
Explanation User input incomplete command.
Recommended Action Use 'no mac access-group <name> in [<sequence>]'.
Error Message MAC Access-list does not exist.
Explanation User attempt to assign a non-exist MAC ACL to a interface.
Recommended Action Make sure the MAC ACL is exist.
Error Message Error: ACL and Diffserv can not be used on the same interface in
the same direction.
Explanation User attempt to enable ACL & Diffserv on the same interface.
Recommended Action User can only enable ACL and Diffserv on a interface at the
same time.
To Next Page
Loading...
