Fujitsu PRIMERGY BX900 - Page 271

© 2011 Fujitsu Technology Solutions
Error Message The maximum number of ACLs reached for this interface.
Explanation User attempt to add MAC ACL to the interface has arrived
maximum number of MAC ACLs.
Recommended Action Maximum 17 MAC ACLs can be created for a interface.
Error Message Unable to remove the specified MAC access-control list from the
specified interface in the inbound direction.
Explanation User attempt to remove a MAC ACL does not assign to this
interface.
Recommended Action Make sure the MAC ACL has been assigned to the interface.
Error Message No rules have been configured for this MAC ACL
Explanation User attempt to show the MAC ACL has no rules.
Recommended Action Create a rule for the MAC ACL first.
Error Message Incorrect input! Use 'mac access-list extended rename
<oldname> <newname>'
Explanation User input incomplete command.
Recommended Action Use 'mac access-list extended rename <oldname> <newname> '
Error Message MAC Access-list already exists.
Explanation User attempt to rename a old MAC ACL name to an exist MAC
ACL name.
Recommended Action Rename to other non-exist ACL name.
Error Message MAC Access-list does not exist.
Explanation User attempt to assign a non-exist MAC Access-list to a
interface.
Recommended Action Make sure the MAC Access-list is exist.
Error Message The {assign-queue|mirror|redirect} functions are only allowed on
'permit' rule.
Explanation User attempt to create a deny rule with
{assign-queue|mirror|redirect} functions.
Recommended Action Changerule to permit.
Error Message Incorrect input! Ethertype custom value must be from 0x0600 to
0xffff.
Explanation User attempt to create a rule with invalid ethertype custom value.