© 2011 Fujitsu Technology Solutions
Recommended Action Ethertype custom value must be from 0x0600 to 0xffff.
Error Message ACL rule log feature is not supported for a permit action.
Explanation User attempt to create a permit rule with log feature.
Recommended Action Change rule to deny.
Error Message ERROR: Invalid interface format. Must use format -
<unit/slot/port>
Explanation User attempt to create a rule with invalid interface format.
Recommended Action Correct the format of interface to <unit/slot/port>.
Error Message Maximum rule id reached. Please create rule with rule id <1 to
10>
Explanation User attempt to add a rule with rule ID out of range <1-10>.
Recommended Action Please create rule with rule ID <1 to 10>
Error Message ACL rules are full.
Explanation User attempt to add a rule when table is full.
Recommended Action Maximum 10 rules can be created.
To Next Page
Loading...
