© 2011 Fujitsu Technology Solutions
Error Message Incorrect input! Use 'switch <unit> priority <value>'
or Use 'switch <unit> provision'
or Use 'switch movemanagement <fromunit>
<tounit>'.
Explanation User input incomplete command .
Recommended Action Use 'switch <unit> priority <value>'
or Use 'switch <unit> provision'
or Use 'switch movemanagement <fromunit>
<tounit>'.
Error Message User Input Error: Switch priority must be in the range of 0 to 15!
Explanation User input invalid value for switch priority.
Recommended Action Use value in the range of 0 to 15.
Error Message Incorrect input! Use 'switch <unit> priority <value>'.
Explanation User input incomplete command .
Recommended Action Use 'switch <unit> priority <value>'.
Error Message Incorrect input! Use 'switch movemanagement <fromunit>
<tounit>'.
Explanation User input incomplete command .
Recommended Action Use 'switch movemanagement <fromunit> <tounit>'.
Error Message Incorrect input! Use 'no switch <unit> {provision | priority}'.
Explanation User input incomplete command .
Recommended Action Use 'no switch <unit> {provision | priority}'.
Error Message The new priority will be applied to the master election process if
the re-election is required.
Explanation User modify the stacking priority of a unit, the priority is effective
after re-election process.
Recommended Action Remove the stacking cable and reconnect it to have switch
re-election.
Error Message Unit <unit Id> does not exist.
Explanation User try to move stack management functionality to a unit, but
the unit number doesn’t exist.
Recommended Action Use the correct unit number for this function.
To Next Page
Loading...
