© 2011 Fujitsu Technology Solutions
Error Message Source and Target Switch ID should not be the same.
Explanation User try to move stack management functionality to a unit, but
the source and target unit number is the same.
Recommended Action Use the correct source and target unit number for this function.
Error Message Incorrect input! Use 'archive copy-sw [destination-system
<unit>]'.
Explanation User input incomplete command .
Recommended Action Use 'archive copy-sw [destination-system <unit>]'.
Error Message Incorrect input! Use 'archive download-sw <url>'
Explanation User input incomplete command .
Recommended Action Use 'archive download-sw <url>'
Error Message Invalid url specified! Use xmodem or
tftp://<ipaddress>/<filepath>/<fileName>.
Explanation User input incorrect URL format.
Recommended Action Use the correct URL format for this function.
Error Message ERROR: Filename must be 31 alphanumeric characters or less!
Explanation User input the file name length is over 31 characters.
Recommended Action The file name length should less than 31 characters.
Error Message ERROR: Filepath must be 95 alphanumeric characters or less!
Explanation User input the file path length is over 95 characters.
Recommended Action The file path length should less than 95 characters.
Error Message Cannot Use Xmodem Transmit Function in TELNET.
Explanation User try to download software by Xmodem protocol, but the
management connection is from Telnet method not from
Console (serial) port.
Recommended Action User should use the Console port to manage switch, and
download software by Xmodem protocol.
To Next Page
Loading...
