© 2011 Fujitsu Technology Solutions
Error Message Error: Value (<value>) is out of range for Assign Queue ID. The
valid range is 0 to 7.
Explanation The value of IP ACL Assign Queue ID is out of range.
Recommended Action The range of IP ACL Assign Queue ID is 0 to 7.
Error Message Error: Protocol Number format is invalid.
Explanation User try to configure the IP ACL Protocol Number with
non-numeric characters.
Recommended Action Use numeric characters for IP ACL Protocol Number.
Error Message Error: Value (<value>) is out of range for Protocol Number. The
valid range is 0 to 255.
Explanation The value of Protocol Number is out of range.
Recommended Action The range of IP ACL Protocol Number is 0 to 255.
Error Message Error: Source IP Address requires an IP address in x.x.x.x form
with each octet(x) in the range 0-255.
Explanation User input the Source IP Address with non-numeric characters
or out of range.
Recommended Action Use numeric characters 0-255 in x.x.x.x form for Source IP
Address.
Error Message Error: Source Wildcard Mask requires a subnet mask in x.x.x.x
form.
Explanation User input the Source IP Wildcard Mask with non-numeric
characters or out of range.
Recommended Action Use numeric characters 0-255 in x.x.x.x form for Source IP
Wildcard Mask.
Error Message Error: Source L4 Port Number format is invalid.
Explanation User try to configure Source L4 Port Number with non-numeric
characters.
Recommended Action Use numeric characters for IP ACL Source L4 Port Number.
Error Message Error: Value (<value>) is out of range for Source L4 Port
Number. The valid range is 0 to 65535.
Explanation The value of Source L4 Port Number is out of range.
Recommended Action The range of IP ACL Source L4 Port Number is 0 to 65535.
Error Message Error: Destination IP Address requires an IP address in x.x.x.x
To Next Page
Loading...
