© 2011 Fujitsu Technology Solutions
form with each octet(x) in the range 0-255.
Explanation User input the Destination IP Address with non-numeric
characters or out of range.
Recommended Action Use numeric characters 0-255 in x.x.x.x form for Destination IP
Address.
Error Message Error: Destination Wildcard Mask requires a subnet mask in
x.x.x.x form.
Explanation User input the Destination IP Wildcard Mask with non-numeric
characters or out of range.
Recommended Action Use numeric characters 0-255 in x.x.x.x form for Destination IP
Wildcard Mask.
Error Message Error: Destination L4 Port Number format is invalid.
Explanation User try to configure Destination L4 Port Number with
non-numeric characters.
Recommended Action Use numeric characters for IP ACL Destination L4 Port Number.
Error Message Error: Value (<value>) is out of range for Destination L4 Port
Number. The valid range is 0 to 65535.
Explanation The value of Destination L4 Port Number is out of range.
Recommended Action The range fo IP ACL Destination L4 Port Number is 0 to 65535.
Error Message Error: Value (<value>) is out of range for IP DSCP. The valid
range is 0 to 63.
Explanation The value of IP DSCP is out of range.
Recommended Action The range of IP DSCP Number of IP ACL is 0 to 63.
Error Message Error: IP Precedence format is invalid.
Explanation User try to configure IP Precedence Number with non-numeric
characters.
Recommended Action Use numeric characters for IP Precedence Number of IP ACL.
Error Message Error: Value (<value>) is out of range for IP Precedence. The
valid range is 0 to 7.
Explanation The value of IP Precedence is out of range.
Recommended Action The range of IP Precedence Number of IP ACL is 0 to 7.
Error Message Error: TOS Bits format is invalid.
Explanation User try to configure TOS Bits with non-numeric characters.
Recommended Action Use numeric characters for TOS Bits of IP ACL.
To Next Page
Loading...
