Fujitsu PRIMERGY BX900 - Page 410

© 2011 Fujitsu Technology Solutions
Error Message Error: Failed to set Destination MAC and Destination MAC Mask.
Destination MAC Mask is an invalid MAC address.
Explanation User try to configure the Destination MAC Mask of a MAC ACL,
but the selected MAC ACL name does not exist.
Recommended Action Refresh the WEB page, and select the correct MAC ACL name
again.
Error Message Error: Failed to set Ethertype User Value. Ethertype User Value
is an invalid hex.
Explanation User try to configure the Ethertype of a MAC ACL, but the value
is not valid alphanumeric characters.
Recommended Action Configure MAC ACL Ethertype with alphanumeric characters
600 to ffff.
Error Message Error: Value (<value>) is out of range for Ethertype User Value.
The valid range is 600 to ffff.
Explanation The value of MAC ACL Ethertype is out of range.
Recommended Action The range of MAC ACL Ethertype with 600 to ffff.
Error Message Error: Failed to set Source MAC and Source MAC Mask. Source
MAC is an invalid MAC address.
Explanation User try to configure the Source MAC of a MAC ACL, but the
selected MAC ACL name does not exist.
Recommended Action Refresh the WEB page, and select the correct MAC ACL name
again.
Error Message Error: Failed to set Source MAC and Source MAC Mask. Source
MAC Mask is an invalid MAC address.
Explanation User try to configure the Source MAC Mask of a MAC ACL, but
the selected MAC ACL name does not exist.
Recommended Action Refresh the WEB page, and select the correct MAC ACL name
again.
Error Message Error: Value (<value>) is out of range for VLAN. The valid range
is 0 to 4095.
Explanation The value of MAC ACL VLAN is out of range.
Recommended Action The range of MAC ACL VLAN is 0 to 4095.