Fujitsu PRIMERGY BX900 - Page 420

© 2011 Fujitsu Technology Solutions
Error Message User Input Error: IP DSCP value out of range.
Explanation The value of DiffServ Class Match IP DSCP is out of range.
Recommended Action The range of DiffServ Class Match IP DSCP is 0 to 63.
Error Message User Input Error: IP TOS value out of range.
Explanation The value of DiffServ Class Match TOS is out of range.
Recommended Action The range of DiffServ Class Match TOS is 00 to ff hex value.
Error Message User Input Error: IP TOS Mask value out of range.
Explanation The value of DiffServ Class Match TOS Mask is out of range.
Recommended Action The range of DiffServ Class Match TOS Mask is 00 to ff hex
value.
Error Message User Input Error: Invalid Protocol Number.
Explanation The value of DiffServ Class Match Protocol Number is out of
range.
Recommended Action The range of DiffServ Class Match Protocol Number is 0 to 255.
Error Message User Input Error: VLAN Identifier value out of range.
Explanation The value of DiffServ Class Match VLAN ID is out of range.
Recommended Action The range of DiffServ Class Match VLAN ID is 0 to 4095.
Error Message Class Match Criteria full.
Explanation User try to configure the DiffServ Class Match Criteria, but the
Criteria has reached the maximum.
Recommended Action Because the Class Criteria can’t be removed. User should delete
a DiffServ Class setting, and create a new Class Rule. Then add
the new Criteria for the DiffServ Class.
Error Message Failed to delete class from policy.
Explanation User try to delete a class which is associated with policy, and it is
failed.
Recommended Action Remove the associated policy before deleting the class.