Fujitsu PRIMERGY BX900 - Page 55

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message Unable to initialize dot1x debug
Explanation Unable to initialize dot1x debug when the configurator control
commands/request pair init phase 1.
Recommended Action The dox1 mdoule is failed to init.
Severity Level 6
Error Message Failure in dot1xTxRxInit
Explanation Failed to register function with sysnet to receive PDUs when the
configurator control commands/request pair init phase I.
Recommended Action The dox1 mdoule is failed to init.
Severity Level 6
Error Message dot1x: Unable to register with NIM
Explanation Unable to register with NIM when the configurator control
commands/request pair Init Phase 2.
Recommended Action The dox1 mdoule is failed to init.
Severity Level 6
Error Message dot1x: Unable to register for RADIUS response callback
Explanation Unable to register for RADIUS response callback when the
configurator control commands/request pair Init Phase 2.
Recommended Action The dox1 mdoule is failed to init.
Severity Level 6
Error Message Failed to create dot1x task
Explanation Failed to create dot1x task when initialize dot1x tasks and data.
Recommended Action The dox1 mdoule is failed to init.
Severity Level 6
Error Message Unable to initialize dot1xTask()
Explanation Unable to initialize dot1x task.
Recommended Action The dox1 mdoule is failed to init.
Severity Level 6
Error Message Failed to create dot1x timer task
Explanation Failed to create dot1x timer task when initialize dot1x tasks and
data.
Recommended Action The dox1 mdoule is failed to init.